How To Deal With The Wet Plaster Problem? What Can Be Done To Speed Up The Renovations?

Home Renovations Littleton CO

The fall and winter season is full of challenges for bricklayers, plasterers, and painters. The progress of many works depends on the weather conditions, which in these seasons can be very variable. Despite the low temperatures, strong winds, and continuous rains, employees can cope with omnipresent and heavy humidity.


It often turns out that finishing work on a building, such as painting or renovating, creates the same number of problems as exterior construction work. This results from the fact that water is a commonly used substrate for mortars, paints, or concrete. Unfortunately, the elimination of excess water from the renovated rooms is very difficult, particularly in the autumn-winter period. Damp floors and walls prevent further work from being carried out, causing delays in the entire project’s implementation. In such situations, intensive heating and ventilation of the premises or popular dehumidifiers are required.


Condensing dehumidifiers are very popular on construction sites – they are effective in removing moisture from the premises, regardless of the outside temperature. Condensation dehumidification removes vapor from the air by cooling it below the dew point (the temperature at which the vapor turns into water). The water obtained during the condensation process in the evaporator is discharged into the tank. Simultaneously, the dehumidified air is released at a temperature a few degrees higher than that taken (usually, the dehumidified air is 3 – 8 ° C warmer ). Dry and warm air greatly accelerates the process of evaporation of water from walls and floors. The method, which consists of dehumidifying the air, is much more effective and economical than, for example, the heating and ventilation of the room (energy consumption is much higher). Dehumidifiers reduce the risk of discoloration and cracks on the walls, which are characteristic of dehumidification with hot air.

Dehumidification in Littleton CO

The use of condensing dehumidifiers in Littleton is very convenient, and the list of benefits is very long. There are several models of dehumidifiers especially designed for use in industry and smaller models, perfect for application inside residential buildings. However, regardless of their place of use, their application must be carried out correctly.


It must be remembered that the room in which the dehumidifier will be used must be closed to avoid the influx of humid air from the outside. The dehumidifier should not be located too close to the walls and consequently lower its effectiveness. It is recommended to place the device in the center of the room, at a distance of at least 20-50cm from the walls. This is the only way to get the best effects. Remember not to use this kind of device in rooms where the temperature is very low (below 5 ° C). The dehumidification time with the use of these devices varies from a few hours to a few days. It all depends on the temperature, the volume of the room, the humidity level, and the dehumidifier’s efficiency.


When selecting the correct device, the needs related to efficiency, the temperature range in which the device can operate, and the power outlet must be considered. Undoubtedly, consultation with an expert can be helpful and will surely help you choose the best model for certain conditions.

Leave a reply

Your email address will not be published. Required fields are marked *